Fiberglass Water Well Sucker Rods - With (2) Rod Guides

Description	X	Length (Feet)	Pin Size
5/8" Rod	X	15.75’	5/8"
5/8" Rod	X	20’	5/8"
5/8" Rod	X	21’	5/8’
3/4" Rod	X	15.75’	7/8’
3/4" Rod	X	21’	7/8"

(Sucker Rod with Guide)

Fiberglass Water Well Sucker Rods - Without Rod Guides

Description	X	Length (Feet)	Pin Size
5/8"	X	21’	5/8’
(Less Guides)
3/4"	X	21"	7/8"
(Less Guides)
Note: 5 Rods Per Bundle

(Rod Without Guides)

A variety of accessories are offered to help with the repair or adaptation of AquaFlex rods and their components to meet any specific requirements. This can range from making custom length rods, to on-site repair, or even connecting two different rod string sizes together in one string.

(Use with rod strings that are non-ridged or that are lighter than 43 lbs. / 100 ft.) The use of a steel shaft (1 3 / 16 " diameter) to tie sucker rod strings into the working check of the pump may increase the pumping capacity up to 30% by keeping tension on the rod and helping to ensure a full storke of the pump. A sinker bar that has been precision machined will also help ensure proper alignment of the working check (plunger) in the cylinder, thus increasing the efficiency and expected life of the pump cups (leathers).

(Sinker Bar)

Comes with:
Coupling
50ml Cartridge Plunger
Mixing Nozzle
2 oz. Plastic Welder
and Sandpaper (not pictured)

Replacement Guides are made to slide onto the rod body using the two halves, and hammered closed for a tight fit.

Couplings are used to connect solid steel sucker rods together, or to go from one rod size to another. Adapters are used to screw the sucker rod into a different sized plunger assembly, or to tie together different rod sizes in one string.