PS600 CS-15-1 Pool Pump System
Solar-operated Centrifugal Surface Pump
Characterisitcs
  • Flow rate up to 15 m3/h (4,000 GPH)
  • Excellent serviceability
  • maintenance-free thanks to brushless DC motor
  • excellent efficiency
  • Short Return on Investment (ROI) cycle
  • Lower Total Cost of Ownership (TCO)
Pump System PS600 BADU Top 12
Article # 2921
Controller PS600
Motor ECDRIVE 600 BADU Top
Pump End (PE) BADU Top12, manufacturer Speck Pumps
source of energy solar generator 340-900 Wp
not contained in delivery battery
DC source
PS600
Components
Pump End (PE) CS-15-1
  • Centrifugal pump with integrated strainer tank
  • Bellow mechanical seal is mounted on a plastic shaft protected sleeve
  • Motor/pump shaft has no contact with fluid
  • Total electric separation
  • Strainer capacity approx. 3L
  • Strainer basket mesh size approx. 3.2 x 2.6 mm
Material Used For Pump End
  • Pump casing, strainer basket: PP
  • Flange, gland housing: PP TV 40
  • Diffuser: PP TV 40
  • Impeller: PA 66 GF 30 / PC
  • Lid: PC, transparent
  • Mechanical seal: carbon / ceramic / NBR
  • Bolts: steel, galvanized
Motor ECDRIVE 600
  • Brushless, maintenance-free DC motor
  • No electronics in the motor
  • Premium materials
Controller PS600
  • Controlling of the pump system and monitoring of the operating states
  • Mounted at surface (no submerged electronic parts)
  • Two control inputs for well probe (dry running protection), float or pressure switches, remote control etc.
  • Automatic reset 20 minutes after well probe turns pump off
  • Protected against reverse polarity, overload and high temperature
  • Speed control, max. pump speed adjustable to reduce flow rate to approx. 30%
  • Solar operation: integrated MPPT (Maximum Power Point Tracking)
  • Battery operation: low voltage disconnect and restart after battery has recovered
  • Max. efficiency 92% (motor + controller)

Warranty

Two years manufacturer’s warranty against defects in material and workmanship.


System Sizing Table: Solar-direct Operation

solar generator: nominal voltage 48-72 V DC, open circuit voltage max. 150 V DC

PS600 Solar-direct Operation Table 1
PS600 Solar-direct Operation Table 2

Basis of Calculation

The power output of the solar generator is reduced by 17% (degradation caused by ageing, dust, temperature influences etc. is taken into account). 10 sun hours per day


Chart: Solar-direct Operation

solar generator: nominal voltage 48-72 V DC, open circuit voltage max. 150 V DC

Solar-direct Operation
Chart: Battery Operation

battery, DC power supply: nominal voltage 48 V DC

Battery Operation
Technical Data
PS600 BADU Top 12 Solar Operation Battery operation
max. flow rate 15 m3/h, 4,000 US-Gal./h 13 m3/h, 3,400 US-Gal./h
max. lift 14 m, 46 ft 13 m, 43 ft
max. lift -30° C to +45° C
Controller PS600
input voltage solar generator:
nominal voltage 48-72 V DC
open circuit voltage max. 150 V DC
battery, DC source:
nominal voltage 48 V DC
type of enclosure IP 54
dimensions: net, packing 395 � 175 � 165 mm, 450 � 250 � 240 mm (0.027 m3)
weight: net, gross 4.5 kg, 5.3 kg
Motor ECDRIVE 600 BADU Top
max. power input 600 W
type of enclosure IP X4
class of insulation F
Pump End BADU Top 12
manufacturer Speck Pumps
suction, max. positive inlet lift 3 m, 10 ft
max. casing pressure 2.5 bar
max. water temperature +60° C
Pump unit (motor + pump end)
dimensions: net, packing see drawing below, 520 � 220 � 350 mm (0.04 m3)
weight: net, gross 8.7 kg, 9.7 kg
Dimensions For Pump Unit (Motor + Pump End)
Dimensions For Pump Unit (Motor + Pump End)

  • Model 702
  • Windmill Operation
  • Sucker Rod
  • Cylinders
  • Windmill Accessories
  • Ornamental Mills
  • Quality Control

 

Contact Us At   888.535.4788
© 2010. All Rights Reserved.