PS200 (HR)Helical Rotor or (C)4" Submersible

 

Characteristics
PS200
Applications
PS200 Controller Features

“PS200 Controller is mounted at the surface just like a standard 4” “control box.” The controller is sealed and weatherproof (equivalent to Nema 3R) Its purpose is to control the pump system and displays the operating status of the system. Each control is equipped with two control inputs: One allows for the Dry Well Probes sensor to prevent dry run or pump off conditions the other allows for a float, pressure, or remote control switch to be used. Once the Dry Well Probe sensor trips, the controller will shut down the pump system for 20 minutes to allow the well to recover, then it will automatically restart the system. The controller is equipped with overload, underload, & reverse polarity protection. Each contol come with Variable Speed Control which allows the pump speed to be adjusted to reduce flow rate by approximately 30%. Maximum Power Point Tracking for Solar Operation. Battery Low Voltage disconnect and auto-restart after battery has recovered. Motor & Controller are 88% Efficient. 

 

EC Drive 600(HR)/200(C) Motor Features
4" Submersible Pump Features
Helical Rotor Pump Features
Warranty

  • Model 702
  • Windmill Operation
  • Sucker Rod
  • Cylinders
  • Windmill Accessories
  • Ornamental Mills
  • Quality Control

 

Contact Us At   888.535.4788
© 2010. All Rights Reserved.