The curve below shows the performance range of 4 models at 1800Wp solar array

• irradiation of 6kWh/m² on a tilted surface
• ambient temperature 30°C

Solar tracking will improve performance by approx. 40% in summer months.

• drinking water supply
• livestock watering
• pond management
• irrigation
• village water supply

• controlling of the pump system and monitoring of the operating states
• mounted at surface (no submerged electronic parts)
• two control inputs for well probe (dry running protection), float or pressure switches, remote control etc.
• automatic reset 20 minutes after well probe turns pump off
• protected against reverse polarity, overload and high temperature
• speed control, max. pump speed adjustable to reduce flow rate to approx. 30 %
• solar operation: integrated MPPT (Maximum Power Point Tracking)
• battery operation: low voltage disconnect and restart after battery has recovered
• max. efficiency 92 % (motor + controller)
• enclosure: IP 54 (sealed, weatherproof)

• brushless DC motor
• no electronics inside motor
• water filled
• IP68, pressure balanced, max. submersion unlimited
• dynamic thrust bearings, material: carbon/ceramic
• submersed material: stainless steel (AISI 316), POM, rubber, cable drinking water approved Pump End (PE)
• high life expectancy
• none-return valve
• dry running protection (optional)
• material: stainless steel (AISI 316) Errors excepted and possible alterations without prior notice